We solve the problems:

Fuel economy
Reduction of emissions into the environment
Dewaxing of diesel fuel at low temperatures

Our products

BAND HEATERS for diesel fuel filters


Diesel fuel heaters

Electrical band heaters of NOMACON PB-100 series are destined for diesel fuel filter heating during pre-starting regime and while the engine is running at the ambient operating temperatures from - 40°C (-40 °F) to + 45°C (113°F). The role of the PB-100 series heaters is to assure the filter's fuel flow at the optimal level by reducing diesel fuel viscosity and dissolution the paraffin plugs formed inside of the filter at low temperatures.

The heater is mounted on the body of a metal fuel filter and connected to the electrical circuit of the vehicle. In case of the manual controlled version the switcher is placed in the driver's cabin. The timer-control version is available as well.

The heater exists in different diameters, voltage and power configurations, hence it can be used with almost any new or old metal filter on the market for road cars and cargo trucks as well.

Models and prices
PB-101 Ø 69-73 mm 12 V 42-64 € Buy
PB-102 Ø 73-86 mm 12 V 42-64 € Buy
PB-103 Ø 78-91 mm 12 V 42-64 € Buy
PB-104 Ø 90-105 mm 12 V 46-71 € Buy
PB-105 Ø 73-86 mm 24 V 51-76 € Buy
PB-106 Ø 90-105 mm 24 V 56-81 € Buy
PB-107 Ø 117-125 mm 24 V 72-101 € Buy

DISK-SHAPED HEATERS for diesel fuel filters



The electrical disk shaped heaters are destined for diesel filter heating during pre-starting and cruise operating regime.

The role of the PD-200 series heaters is to assure the filter's fuel flow at the optimal level by reducing diesel fuel viscosity and dissolution the paraffin plugs formed inside of the fuel at the low temperatures.

The heater is mounted between the original cover of the filter and its body and connected to the electrical circuit of the vehicle. The switch is placed in the driver's cabin. There are manual and the timer-control versions available.

The heaters have a standard threading to fit the opening of the engine on one side and the threading M16x1,5 mm to fit the metal body of the filter of 70mm (filter diameter 78 - 85mm) on the other side. Thus, these heaters can be used with any diesel engines having the mentioned threading sizes and the electrical circuits of 12V for PD-201 and 24V for PD-202.

Diesel fuel heaters
Models and prices
PD-201 12 V 66-86 € Buy
PD-202 24 V 66-86 € Buy

ROD-SHAPED DIESEL FUEL HEATERS



Стержневые подогреватели серии НОМАКОН ПС-100 с позисторными нагревательными элементами предназначены для предпускового и маршевого подогрева дизельного топлива в фильтрах тонкой очистки, конструкция которых предполагает возможность встраивания подогревателя внутрь фильтра.

Подогреватели предназначены для подогрева автомобильного дизельного топлива, а также другого дизельного топлива, включая биодизель. Подогреватели также могут применяться для подогрева других жидкостей в любых других конструкциях, при условии совместимости технических характеристик и конструктивных возможностей.

Подогреватели серии ПС-100 универсальны - они монтируются внутрь корпуса топливного фильтра (либо другой подогреваемой емкости) и подключаются к бортовой электросети автомобиля.

Управление подогревом осуществляется вручную при помощи выключателя с индикацией, устанавленного в кабине водителя.

Diesel fuel heaters
Models and prices
PS-101 12 V Buy
PS-102 24 V Buy

FLEXIBLE HEATERS

Diesel fuel heaters

Нагреватель ЭЛАН предназначен для подогрева топливных магистралей, фильтров и других узлов топливных систем дизельных автомобилей и генераторов, в которых парафинизация дизельного топлива при низких температурах окружающей среды приводит к образованию пробок, препятствующих нормальной работе системы питания.

Особенно актуально применение гибких нагревателей для обогрева топливных фильтров в пластмассовом корпусе, а также фильтров со сложной поверхностью корпуса.

Для этих целей рекомендуется использовать нагреватели с удельной мощностью 53 Вт/м.


Models and prices
ELAN-110 100 mm 12 V Buy
ELAN-115 150 mm 12 V Buy
ELAN-120 200 mm 12 V Buy
ELAN-130 300 mm 12 V Buy
ELAN-140 400 mm 12 V Buy
ELAN-210 100 mm 24 V Buy
ELAN-215 150 mm 24 V Buy
ELAN-220 200 mm 24 V Buy
ELAN-230 300 mm 24 V Buy
ELAN-240 400 mm 24 V Buy

ROD-SHAPED POSISTOR DIESEL FUEL HEATERS for filter-separators of Mann-Hummel PreLine® PL 270 and PL 420 models



The electrical rode-shaped heaters with posistor heating elements are destined for diesel fuel heating during pre-starting and cruse operating regime in filters-separators of of Mann-Hummel PreLine® PL 270 and PL 420 models, Fleetguard FuelPro and Fleetguard DieselPro systems and other analogues used in various medium and heavy duty cargo trucks and other motor vehicles with diesel engines.

The heaters are destined for heating standard European diesel fuel types (DIN-EN 590 and DIN 51606 ), as well as other types of diesel fuel.

The PS-202 heater, equipped with external and internal electronic temperature sensors is a stand-alone device with its own electronic temperature control unit. It switches on at the temperature of below + 5°C and switches off at the temperature of over +5°C.

The PS-202 heater is universal. It can be used on any diesel fuel engine with 24V power circuit and the fuel consumption rate of up to 420L/hour.

Diesel fuel heaters
Models and prices
PS-202 24 V 106-129 € Buy

IN-LINE DIESEL FUEL HEATERS

Diesel fuel heaters

The electrical in-line, self-controlled diesel fuel heaters with posistor heating elements are designed to be installed in the cut of the fuel line just before the fine filter of before the filter-separator, they function at cruise operating mode (while engine is running).

The heater is installed in the cut of the regular fuel line and connected to the electrical grid. The heaters have an internal electronic temperature sensor and a MOSFET temperature control unit. It’s a stand-alone device and does not need to be controlled or monitored by the driver. It switches on at the temperature of below + 5°C and switches off at the temperature of over +5°C .

Minimal physical size, light weight and a fixing bracket allows fast and ea­sy installation of the heater into the engine compartment of any vehicle.



The heaters of PP-200 series are universal and can be used on any type of diesel engines with either 12 or 24 volts electrical circuits and the maximal fuel flow up to 680 l/h.


Models and prices
PP-101 12 V 69-90 € Buy
PP-102 24 V 69-90 € Buy
PP-201 12 V 79-106 € Buy
PP-202 24 V 79-106 € Buy
PP-301 12 V 96-120 € Buy
PP-302 24 V 96-120 € Buy

HEATED NOZZLES FOR DIESEL FUEL STANDPIPES

The heated nozzle of NTP-100, 200 series are designed to be installed on regular standpipe with a purpose of fuel intake from inside of the fuel tank at low temperatures when frozen and thickened fuel cannot be taken by a non heated regular standpipe. Pre-heating prior to engine start contributes to dewaxing and fuel viscosity improvement. At very low temperatures the continuous in-tank fuel heating while engine running is possible.

The nozzle is connected directly to the electrical grid of the vehicle. In case of manual control version the LED illuminated switch button is placed in the vicinity of the driver.

Models and prices
NTP-101 12 V 57-80 € Buy
NTP-102 24 V 57-80 € Buy
NTP-301 12 V 127-147 € Buy
NTP-302 24 V 127-147 € Buy
Diesel fuel heaters

Contact us

Fill out the form below with some questions and we will get back to you as soon as we can. Please allow a couple days for us to respond.




Reload

If the message was not sent, please click RELOAD and enter the code once again.