Nos produits

RECHAUFFEURS A BANDE pour filtres diesel NOMACON™ séries PB-100


Diesel fuel heaters

Les réchauffeurs à bande de la série NOMACON PB-100 sont destinés au chauffage de filtres à carburant diesel pendant le régime de pré-démarrage et à moteur tournant pour une plage de températures de -40 °C (-40 °F) à + 45 °C (113°F).

Le but des réchauffeurs de la série PB-100 est d'assurer un flux de carburant à un niveau optimum en réduisant la viscosité du carburant diesel et en dissolvant des flocons de paraffine formés à basse température à l'intérieur du filtre.

Le réchauffeur est monté sur le corps du filtre à carburant métallique et raccordé au circuit électrique du véhicule. Pour la version à contrôle manuel, l'interrupteur est placé dans la cabine chauffeur. La version contrôle temporisé est également disponible.

Le réchauffeur est disponible en différents diamètres, voltages et puissances, il peut donc convenir pour quasiment tous les filtres existants sur le marché.

Modèles et prix
PB-101 Ø 69-73 mm 12 V 42-64 € Acheter
PB-102 Ø 73-86 mm 12 V 42-64 € Acheter
PB-103 Ø 78-91 mm 12 V 42-64 € Acheter
PB-104 Ø 90-105 mm 12 V 46-71 € Acheter
PB-105 Ø 73-86 mm 24 V 51-76 € Acheter
PB-106 Ø 90-105 mm 24 V 56-81 € Acheter
PB-107 Ø 117-125 mm 24 V 72-101 € Acheter

RECHAUFFEUR DISQUE pour filtres diesel NOMACON™ séries PD-200



Les réchauffeurs disque électriques sont destinés au chauffage de filtres à carburant diesel pendant le régime de pré-démarrage et à moteur tournant.

Les réchauffeurs sont destinés à des filtres métalliques de véhicules roulants au carburant diesel standard Européen (DIN-EN 590 et DIN 51606), ainsi que d'autres diesel. Le rôle des filtres de la série PD-200 est d'assurer un flux de carburant à un niveau optimum en réduisant la viscosité du carburant diesel et en dissolvant des flocons de paraffine formés à basse température à l'intérieur du filtre.

Le réchauffeur est monté entre le couvercle original du filtre et son corps et raccordé au circuit électrique du véhicule. Pour la version à contrôle manuel, l'interrupteur est placé dans la cabine chauffeur. La version contrôle temporisé est également disponible.

Les réchauffeurs ont à une extrémité un filetage normal adapté à l'ouverture moteur et de l'autre extrémité un filetage M16x1,5 mm adapté au corps métallique du filtre de 70mm (filtre diamètre 78 – 85 mm). Ces réchauffeurs peuvent donc être utilisés sur tout type de moteur diesel de filetages mentionnés et d'une alimentation électrique de 12V pour le type PD-201 et de 24 V pour le PD-202.

Diesel fuel heaters
Modèles et prix
PD-201 12 V 66-86 € Acheter
PD-202 24 V 66-86 € Acheter

ROD-SHAPED DIESEL FUEL HEATERS



The electrical disk shaped heaters are destined for diesel filter heating during pre-starting and cruise operating regime.

The role of the PD-200 series heaters is to assure the filter's fuel flow at the optimal level by reducing diesel fuel viscosity and dissolution the paraffin plugs formed inside of the fuel at the low temperatures.

The heater is mounted between the original cover of the filter and its body and connected to the electrical circuit of the vehicle. The switch is placed in the driver's cabin. There are manual and the timer-control versions available.

The heaters have a standard threading to fit the opening of the engine on one side and the threading M16x1,5 mm to fit the metal body of the filter of 70mm (filter diameter 78 - 85mm) on the other side. Thus, these heaters can be used with any diesel engines having the mentioned threading sizes and the electrical circuits of 12V for PD-201 and 24V for PD-202.

Diesel fuel heaters
Modèles et prix
PS-101 12 V Acheter
PS-102 24 V Acheter

FLEXIBLE HEATERS

Diesel fuel heaters

The electrical disk shaped heaters are destined for diesel filter heating during pre-starting and cruise operating regime.

The role of the PD-200 series heaters is to assure the filter's fuel flow at the optimal level by reducing diesel fuel viscosity and dissolution the paraffin plugs formed inside of the fuel at the low temperatures.

The heater is mounted between the original cover of the filter and its body and connected to the electrical circuit of the vehicle. The switch is placed in the driver's cabin. There are manual and the timer-control versions available.

The heaters have a standard threading to fit the opening of the engine on one side and the threading M16x1,5 mm to fit the metal body of the filter of 70mm (filter diameter 78 - 85mm) on the other side. Thus, these heaters can be used with any diesel engines having the mentioned threading sizes and the electrical circuits of 12V for PD-201 and 24V for PD-202.


Modèles et prix
ELAN-110 100 mm 12 V Acheter
ELAN-115 150 mm 12 V Acheter
ELAN-120 200 mm 12 V Acheter
ELAN-130 300 mm 12 V Buy
ELAN-140 400 mm 12 V Acheter
ELAN-210 100 mm 24 V 73-55 € Acheter
ELAN-215 150 mm 24 V Acheter
ELAN-220 200 mm 24 V Acheter
ELAN-230 300 mm 24 V 73-55 € Buy
ELAN-240 400 mm 24 V 73-55 € Acheter

ROD-SHAPED POSISTOR DIESEL FUEL HEATERS for filter-separators of Mann-Hummel PreLine® PL 270 and PL 420 models



The electrical rode-shaped heaters with posistor heating elements are destined for diesel fuel heating during pre-starting and cruse operating regime in filters-separators of of Mann-Hummel PreLine® PL 270 and PL 420 models, Fleetguard FuelPro and Fleetguard DieselPro systems and other analogues used in various medium and heavy duty cargo trucks and other motor vehicles with diesel engines.

The heaters are destined for heating standard European diesel fuel types (DIN-EN 590 and DIN 51606 ), as well as other types of diesel fuel.

The PS-202 heater, equipped with external and internal electronic temperature sensors is a stand-alone device with its own electronic temperature control unit. It switches on at the temperature of below + 5°C and switches off at the temperature of over +5°C.

The PS-202 heater is universal. It can be used on any diesel fuel engine with 24V power circuit and the fuel consumption rate of up to 420L/hour.

Diesel fuel heaters
Modèles et prix
PS-202 24 V 106-129 € Acheter

IN-LINE DIESEL FUEL HEATERS

Diesel fuel heaters

The electrical in-line, self-controlled diesel fuel heaters with posistor heating elements are designed to be installed in the cut of the fuel line just before the fine filter of before the filter-separator, they function at cruise operating mode (while engine is running).

The heater is installed in the cut of the regular fuel line and connected to the electrical grid. The heaters have an internal electronic temperature sensor and a MOSFET temperature control unit. It’s a stand-alone device and does not need to be controlled or monitored by the driver. It switches on at the temperature of below + 5°C and switches off at the temperature of over +5°C .

Minimal physical size, light weight and a fixing bracket allows fast and ea­sy installation of the heater into the engine compartment of any vehicle.



The heaters of PP-200 series are universal and can be used on any type of diesel engines with either 12 or 24 volts electrical circuits and the maximal fuel flow up to 680 l/h.


Modèles et prix
PP-101 12 V 69-90 € Acheter
PP-102 24 V 69-90 € Acheter
PP-201 12 V 79-106 € Acheter
PP-202 24 V 79-106 € Acheter
PP-301 12 V 96-120 € Acheter
PP-302 24 V 96-120 € Acheter

HEATED NOZZLES FOR DIESEL FUEL STANDPIPES

The heated nozzle of NTP-100, 200 series are designed to be installed on regular standpipe with a purpose of fuel intake from inside of the fuel tank at low temperatures when frozen and thickened fuel cannot be taken by a non heated regular standpipe. Pre-heating prior to engine start contributes to dewaxing and fuel viscosity improvement. At very low temperatures the continuous in-tank fuel heating while engine running is possible.

The nozzle is connected directly to the electrical grid of the vehicle. In case of manual control version the LED illuminated switch button is placed in the vicinity of the driver.

Modèles et prix
NTP-101 12 V 57-80 € Acheter
NTP-102 24 V 57-80 € Acheter
NTP-301 12 V 127-147 € Acheter
NTP-302 24 V 127-147 € Acheter
Diesel fuel heaters

Contactez-nous

Remplissez le formulaire ci-dessous. Nous vous répondrons dès que possible. Merci !




Reload

Si le message n'a pas été envoyé, veuillez cliquer sur RELOAD et insérer le code ancore une fois.